11
3. Settings.
3.7 Push bar handling
The push bar makes it easier to reloca-
te the room frame, and can be adjus-
ted in depth and angle. The angle is
adjusted by releasing the quickrelease
clamp (
A
) on both sides. Then bring the
push bar into the correct position and
tighten the quick-release clamp (
A
)
again. The depth is adjusted by loo-
sening the grub screws (
B
) on the right
and left-hand side below the adapter.
The release lever (
C
) for the seat ang-
le adjustment can also be mounted on
the push bar / handle or on the back of the seat pan if used later.
3.8 Handling push handle
The push handle makes it easier to re-
locate the room frame, and can be ad-
justed in height and angle. The angle
can be adjusted by releasing the lever
(
D
). Adjust the required angle position
and tighten the lever again. The height
adjustment is conducted via the lever
(
E
): release it, adjust to the correct po-
sition and then tighten the lever firmly
again.
Only use the push handle to push the sub-frame! Do not hang objects
onto the push handle! Increased risk of tipping!
3.9 Wheel base extension
The wheel base extension is used to
keep the product steady, in particular
with larger seat pans and seat angles
tilted far to the rear. The wheel base
extension (10 cm) is fixed, and cannot
be adjusted.
The wheel base extension is fixed and cannot be adjusted!
A
B
C
E
D
