31
30
e
n
g
li
sh
F300
Features and markings
Please refer to the following table for all relevant properties of this helmet and
the significance of these. The helmet identification can be found at the front of
the helmet, on the inside of the helmet shell.
SCHUBERTH F 300 firefighter‘s helmet
Markings
Explanation of markings
EN 443:2008
European standard pursuant to which approval has
been given
09/12
Sample specification of production month and year
(september 2012)
Type A
Type: Half-shell helmet
F 300 / M
Helmet description/helmet shell size
48-58
Head size range in cm of the SCHUBERTH F 300
UP-GF
Short description of the helmet material (fibreglass
reinforced thermoset)
0299
Number of the monitoring authority
Optional features and markings
Markings
Explanation of markings
****
The SCHUBERTH F 300 firefighter‘s helmet is suitable for
use at low temperatures to -40 °C
Approval for firefighting on ships
E2 E3
Electrical insulation resistance of the SCHUBERTH F 300
firefighter‘s helmet and the shell
C
Resistance to contact with fluid chemicals
Overview of chemicals that have been tested on the
helmet and visor
Chemical concentration
(mass percentage)
Sulphuric acid
30 (aqueous solution)
Sodium hydroxide
10 (aqueous solution)
p-xylene
undiluted
Butane 1 oil
undiluted
n-heptane
undiluted
Intervening notified body 0299
DGUV-Test, Prüf- und Zertifizierungsstelle
[DGUV test, inspection and certification body],
Fachausschuss Persönliche Schutzausrüstungen (PSA)
[Technical Committee for Personal Protective Equipment (PPE)]
Zwengenberger Straße 68
42781 Haan
Germany
Tel.: +49 (0)2129 576-431
Fax: +49 (0)2129 576-400
Manufacturer
SCHUBERTH GmbH
Stegelitzer Str. 12
39126 Magdeburg
Germany
Tel.: +49 (0)391 8106-0
Fax: +49 (0)391 8106-180
E-mail: [email protected]
www.schuberth.com
Subject to technical changes.
No warranty is accepted for errors or printing errors.
