![Schonstedt Loki Contractor Скачать руководство пользователя страница 6](http://html.mh-extra.com/html/schonstedt/loki-contractor/loki-contractor_user-manual_1214162006.webp)
5
Loki Transmitter
The Loki transmitter is a general purpose, 1 Watt, transmitter that provides three
locatable frequencies, two induction frequencies and two signal strengths. By
default, the Loki Transmitter induces a signal directly into the ground.
1. On/Off/Frequency Selector.
LEDs indicate
which frequency has been selected.
a. First press switches the transmitter on
and selects the lowest locate frequency.
NOTE: the lowest frequency is only available for direct connections and will not
work in induction mode.
b. Second and third presses select the mid and highest frequencies.
c.
Fourth press turns the transmitter off.
2. Signal Boost
Press to boost the locate signal strength from low to high signal strength.
LEDs indicate which power level is active. Press again to return to standard
power.
3. Accessory Socket
Connects cables or optional accessories such as the Signal Clamp, Direct
connection lead or Live Plug Connector.
When connected, induction mode is disabled. A loudspeaker emits a pulsing
tone to indicate sufficient battery charge and a satisfactory direct connection.
4. Battery Access Panel
. When no tone is audible the batteries must be
replaced.
5. Arrows
The arrows on the top panel label indicate the required transmitter alignment
above the pipe or cable when using Induction mode.
The arrows and the pipe or cable must be parallel. Alignment is not required
when the transmitter is in Direct Connect mode.
Note: Turn off the Loki transmitter and remove any cables or accessories before
changing batteries
1
2
3
5
4