Schonstedt Loki Contractor Скачать руководство пользователя страница 23

Страница: 23 / 24

d. Damage or changes to the product as a result of:

Misuse, including: - treatment resulting in physical, cosmetic or surface
damage or changes to the product or damage to liquid crystal displays.

ii. Failure to install or use the product for its normal purpose or in accor-

dance with Schonstedt instructions on installation or use.

iii. Failure to maintain the product in accordance with Schonstedt instruc-

tions on proper maintenance.

iv. Installation or use of the product in a manner inconsistent with the techni-

cal or safety laws or standards in the country where it is installed or used.

Virus infections or use of the product with software not provided with the
product or incorrectly installed software.

vi. The condition of or defects in systems with which the product is used or

incorporated except other ‘Schonstedt products’ designed to be used with
the product.

vii. Use of the product with accessories, peripheral equipment and oth-

er products of a type, condition and standard other than prescribed by
Schonstedt.

viii. Repair or attempted repair by persons who are not Schonstedt warranted

and certified repair houses.

ix. Adjustments or adaptations without Schonstedt’s prior written consent,

including:

i. Upgrading the product beyond specifications or features described

in the instruction manual, or modifications to the product to conform

it to national or local technical or safety standards in countries other

than those for which the product was specifically designed and man

ufactured.

Neglect e.g. opening of cases where there are no user replaceable parts.

xi. Accidents, fire, liquids, chemicals, other substances, flooding, vibrations,

excessive heat, improper ventilation, power surges, excess or incorrect
supply or input voltage, radiation, electrostatic discharges including light-
ning, other external forces and impacts.

Содержание Loki Contractor

























Результаты поиска

Содержание Loki Contractor

Отзывы:

Бренды по названию

Популярные бренды

Schonstedt Loki Contractor, Руководство пользователя

Результаты поиска

Содержание Loki Contractor

Отзывы:

Бренды по названию

Популярные бренды