First use Instruction
Sale company make an
appointment for water
purifier installation.
The installation master shall
install, flush and debug the
whole machine according to the
maintenance procedures.
Users can use
the water purifier
normally.
1.
2.
3.
Starting up
Shutting down
Open the three-way ball valve, and then
plug in.
The whole machine is powered on by
default and all indicator lights flash
3 times.
Close the three-way ball valve,
and then unplug the power cord.
1.
2.
1.
Turn on clean water
Turn on the faucet, at first there will be a trace of black water, which is a normal
phenomenon.
Note:
1. After the whole machine produces water for a
long time (two hours of continuous water production),
the water purifier enters the overtime protection
mode, the panel indicator light flashes, and no water
can be discharged (unplug the power plug until the
display light goes out, and power on again to return to
normal).
2. When the tap water is cutoff, the machine cannot be shut down after turning off the tap
because the water pressure cannot be detected. The indicator is always on. Please turn
off the power supply of the water purifier. If overtime protection is triggered by continuous
work for two hours, please cancel the protection according to the operation in Point
1 above.
19
