POWER SWITCH
DISPLAY
TD-PROBE
MAINFRAME
CONTROL BOARD
HIGH PRESSURE SWITCH
BOOSTER PUMP
W
A
TER INLET
ELECGTRO-
MAGNETIC V
AL
VE
W
ASHING ELECTRO-
MAGNETIC V
AL
VE
Debugging the entire machine
Notes
When using the machine for the first time, in order to ensure the sanity and safety of water,
the tap needs turning on one hour and then turning off, standing for two hours, and purify
waters for 1 hour.
First, open the three-way ball
valve and turn the water
storage tank ball valve o
ff
,
then make the power on, the
machine starts by default.
1.
Close the water faucet and wait
for 60 seconds, then check the
concentrated water of machine
stops or not.
2.
A f t e r c o n
fi
r -
mation, the ma-
chine can be
used in safety.
3.
OPEN THE
WATER INLET
BALL VALVE
TURN
THE
POWER ON
CONCENTRATED
WATER
Service guide
Products parameters
As a result of product improvement, the following parameters may be changed. All the
parematers are are subjected to the product nameplate. The pure water flow is detected
with the ambient temperatureof 25 i 2°C water temperature of 25 i 1°C and the inlet water
pressure of 0.24 i 0.02 MPa.
Model
Rated
quantity
of pure water
RO yielding water
4000 L
RO yielding water
4000 L
RO yielding water
1 L / Min
RO yielding water
1,5 L / Min
Rated
voltage
/ frequency
Overall
rated
power
Pure
water
fl
ow
Work stress
of RO
membrane
Inlet
water
pressure
Electric Schematic Diagram
28
