SCHOLTES TIL 641, Руководство по эксплуатации

Страница: 18 / 52

18
GB
Safety switch
The appliance has a safety switch that automatically
switches off the cooking zones when they have been
in operation for a certain amount of time at a given
power level. When the safety switch has been
triggered, the display shows “0”.
For example: the right rear hotplate is set to 5 and
will switch off after 3 hours of continuous operation,
while the front left hotplate is set to 2 and will switch
off after 10 hours.
Buzzer
Can also indicate several irregularities:
• An object (a pan, cutlery, etc.) has been placed
on the control panel for more than 10 seconds.
• Something has been spilt on the control panel.
• A button has been pressed for too long.
All of the above situations may cause the buzzer
to sound. Remove the cause of the malfunction to
stop the buzzer. The control panel locks
automatically in the above situations. To unlock it
press the [key icon] button; the settings will have
been maintained. If the cause of the problem is
not removed, the buzzer will keep sounding and
the hob will switch off.
• Make sure that the base of the cookware is
always dry and clean, to fully utilise and extend
the life of both the cooking zones and cookware.
• Avoid using the same cookware that has been
used on gas burners: the heat concentration on
gas burners may distort the base of the pan,
causing it not to adhere correctly.
Safety devices
Pan sensor
Each cooking zone is equipped with a pan sensor
device. The hotplate only emits heat when a pan
with suitable measurements for the cooking zone is
placed on it. If the indicator light is flashing, it may
indicate:
• An incompatible pan
• A pan whose diameter is too small
• The pan has been removed from the hotplate.
Residual heat indicators
After the pan has been removed from one of the
cooking zones, part of the power level indicator will
flash while the temperature of that particular zone
remains above 60°C. This reduces the risk of burns
and scalds.
Overheating protection
If the electronic elements overheat, the hob switches
off automatically and “—” appears on the display.
When the temperature has reached an appropriate
level, this message disappears and the hob may be
used again.