SCHOLTES TIL 641, Руководство по эксплуатации

Страница: 17 / 52

GB
17
*
SUITABLE
UNSUITABLE
Cast iron
Enamelled steel
Special stainless steel
Copper,
Aluminium, Glass, Earthenware,
Ceramic, non magnetic Stainless steel
Changing the programme
1. Press the button which
corresponds to the cooking zone to which the
changes will be made.
2. Use the and buttons at the side of the
display to set the new time.
3. Confirm by pressing the
button
corresponding to the relevant cooking zone.
To cancel a programme, follow the above
instructions. When you reach point 2, press the
and buttons at the side of the display
simultaneously: The setting will return to zero and
the display will no longer be operating in the
programme setting mode.
Control panel lock
It is possible to lock the oven controls in order to
avoid accidental changes being made to the
settings (these may be made by children, during
cleaning, etc.). If the button is pressed for 3
seconds the controls are locked and the CONTROLS
LOCKED indicator light illuminates. To use any of
the controls (e.g. to stop cooking), you must switch
off this function. Press the button for 3 seconds
and the lock function will be removed.
When the controls are locked it is still possible to
switch off the hob. In this case the CONTROLS
LOCKED indicator light remains illuminated until the
function is deactivated.
Demo mode
The oven is able to operate in DEMO mode: all
heating elements are deactivated, and controls
remain operative.
To activate the DEMO mode:
1. Switch on the hob ;
2. Press the and buttons simultaneously
and hold for 6 seconds. A buzzer sounds and the
display shows the text dE ON.
3. The hob is now operating in Demo mode.
To deactivate the DEMO mode:
1. Switch on the hob ;
2. Press the and buttons in sequence, then
press the button and hold for 2 seconds. A
buzzer sounds and the display shows the text dE
OF.
3. The hob will now operate normally.
Switching off the hob
Press the button to switch the appliance off.
If the control panel lock has been activated, the
controls will continue to be locked even after the hob
is switched on again. In order to switch the hob on
again, you must first remove the lock function.
Practical advice on using the appliance
Use cookware made from materials that are
compatible with the induction principle
(ferromagnetic material). We especially recommend
pans made from: cast iron, coated steel or special
stainless steel adapted for induction. Use a magnet
to test the compatibility of the cookware.
In addition, to obtain the best results from your hob:
• Use pans with a thick, flat base to fully utilise the
cooking zone.
• Always use pans with a diameter that is large
enough to cover the hotplate fully, in order to use
all the available heat.
The indicator lights corresponding to the other
programmed hotplates will still be illuminated, but
less brightly.
To display the time remaining for a programmed
hotplate, press one of the
buttons
corresponding to the relevant cooking zone. The
display will show the time remaining.