SCHOLTES Hotte, Инструкция по эксплуатации/Инструкция по безопасности

Страница: 30 / 36

30
3. OPERATION
Control panel
1 2 3 4 5 6
1. On/Off touch : to switch on and off the hood
2. Decrease speed
3. Display
4. Increase speed
5. Delay stop : You can program your hood extinction by pressing on the touch timer.
When timer button is pressed, a 15-minute timer function will be activated; display will give a
signal once the timer starts and the motor will switch off automatically after 15 minutes.
6. Light touch : to switch on and off the light.
4. MAINTENANCE
4.1 Cleaning the outer surface
The surface could be damaged due to aggressive and abrasive cleaning agents. Never use
aggressive and abrasive cleaning agents.. To clean the outer surfaces on your hood, use
soapy water and do not use scouring creams or scouring sponges.
4.2 Cleaning the grease filters
Filters should be cleaned every 2 or 3 weeks depending on usage.
Filters should be cleaned when «C» signal appears on the Display or (due to usage)
every 2 or 3 weeks. To delete «C» signal after the filters are cleaned and replaced,
press and hold
button more than 3 secs (when device is off). Letter «E» will appear
on the display and it will switch to normal operation. If operation before deleting the
«C» signal is required, active motor speed will appear for 1 sec when you press
button and then the motor will resume running.
Note : The grease filters can be placed in the dishwasher : Insert them in the dishwasher
without tightening them or in an upright position. In case of washing in dishwasher, a slight
change might occur in color. This has no effect on the function of the metal grease filter.