SCHOLTES Hotte, Инструкция по эксплуатации/Инструкция по безопасности

Страница: 29 / 36

29
Note: The sizes shown in the illustration is for representative purposes. Take the
installing template provided in the product you have purchased.
2. Fix the hood in the cabinet (Fig.8)
The appliance should be mounted in the cabinet on points A, B, C, D by using 4x40
screws provided with the appliance. The front panel should not be rubbed against the
cabinet cover when the sliding set moves.
3. Hood connection (Fig.9)
Connect the aluminum hose to the outlet of the plastic flue. Connect the other end of
the vent pipe on the wall.
Installation B
1. Place the brackets (Fig. 10)
The angle brackets for click mounting must be placed and screwed on the right and
left side to fit with the suspension mechanism on side of the hood. Place the flue
connection supplied with the hood on top of the product as shown in Fig.9. Now turn
the flue to the clockwise direction. Fit the flue duct to the flue connection.
2. Install the hood in the furniture (Fig.11)
Now push the hood up into the cabinet and it will snap into place using of the
suspension mechanism on the angle brackets for click mounting.
3. Secure installation (Fig.12)
Use a screwdriver to secure the hood to the cabinet. This must be made from below
using the suspension mechanism.
Installation C
1. Angle fittings
2. Screws for angle brackets
Secure the angle brackets with the screws on the side of the cabinet so that they
fit with the hood (Fig.13). Mount the product using screws directly on the angle brackets at
points A, B, C & D (Fig. 14).
Remark : New holes can be drilled for the angle brackets on the hood, if the existing ones
cannot be used.
Note : The method of mounting with the angle brackets can be followed in reverse : angle
brackets are first mounted on the hood, B brackets are then screwed onto the cabinet.