AR100 Operation Manual
© 2018 Schmitt Industries
Revision 1.1
33
•
The number of points displayed along the X coordinate can be set in
the
Number of points in buffer
window.
•
Scaling method along the Y coordinate can be set by the
Auto scaling
function.
•
Turn-on/turn-off of the scaling grid is affected by using the
Grid
function.
•
The number of displayed digits after decimal point can be set in the
Set
digits after point
window.
•
To save received data to a file, select (tick)
Write data file
.
Note
: the number of points displayed on the graph depends on PC speed and
becomes smaller in proportion to the data transmission rate. After the stream is
stopped by using the
Stop Stream
button, the graph will display all data
received.
•
To work with the image, press the right mouse key on the graph to call
the corresponding menu:
•
To move the image, just press the mouse wheel.
•
To zoom, rotate the mouse wheel.
•
To save data to a file, press the
Export
button. The program will offer
saving of data in two possible formats: internal and Excel.
•
To scan or look at previously saved data, press the
Import
button and
select the required file.
Setting and saving parameters of the sensor
Setting parameters
Setting of parameters for all interfaces can be done using the respective tabs on
the
Interfaces configuration parameters
panel:
