AR100 Operation Manual
© 2018 Schmitt Industries
Revision 1.1
28
Obtaining connection to sensor (RS232/RS485)
Once the program is started, the main window appears:
To obtain connection via RS232/RS485 interfaces, go to
RS232/RS485 PC
settings
in the
Interface configuration parameters
panel:
•
select the СОМ-port whereto the sensor is connected (logical port if the
sensor is connected via USB-adapter);
•
select the transmission rate (
Baud rate
) at which the sensor works;
•
select the sensor network address, if necessary;
•
press the
Device identification
button.
If the selected parameters correspond to the parameters of the sensor interface,
the program will identify the sensor, read and display its configuration
parameters:
