SCHMITT Acuity AR100, Руководство пользователя

Страница: 18 / 35

AR100 Operation Manual
© 2018 Schmitt Industries Revision 1.1 18
07h Reserved
08h Lower byte of the sampling
period 1) 10…65535 (default — 5000)
The time interval in increments of 1 μs with
which sensor automatically communicates
the results on streaming request (priority of
sampling = 0).
2) 1…65535 (default — 5000)
Divider ratio of trigger input (priority of
sampling = 1).
09h Higher byte of the sampling
period
0Ah Lower byte of maximum
integration time 2…3200 (default – 3200)
The limiting time of integration by CMOS-
array in increments of 1 μs.
0Bh Higher byte of maximum
integration time
0Ch Lower byte for the
beginning of analog output
range 0…16383 (default – 0)
0Dh Higher byte for the
beginning of analog output
range
0Eh Lower byte for the end of
analog output range 0…16383 (default – 16383)
0Fh Higher byte for the end of
analog output range
10h Time lock of result 0…255, specifies the time interval in
increments of 5 milliseconds.
11…16h Reserved
17h Lower byte of a zero point 0…16383 (default — 0), specifies the
beginning of absolute coordinate system.
18h Higher byte of a zero point
19…88h Reserved
89h Autostart of the stream
when the sensor is turned
on (after 20 seconds) 1 — Autostart is ON;
0 — Autostart is OFF (default).
8Ah Protocols for RS232/RS485
interfaces 0 — ACUITY protocol (default);
1 — ASCII protocol;
2 — MODBUS RTU protocol.
Notes
•
All values are given in binary form.
•
Base distance and range are given in millimeters.
•
The value of the result transmitted by a sensor (D) is so normalized that
4000h (16384) corresponds to a full range of the sensor (S in mm),
therefore, the result in millimeters is obtained by the following formula: