Schmalz SMPi 20, Руководство по эксплуатации, Страница: 46 / 50

S
CHMALZ
SCP
I
/ SMP
I
7-46
O
VERVIEW OF DISPLAY SYMBOLS
Symbol Function Comment
H1 switching point Deactivation value of the air-saving function
h1 hysteresis Hysteresis of the air-saving function
H2 switching point
Activation value for the parts control signal output
(when NO output is configured)
h2 hysteresis Hysteresis of parts control signal output
Zero-point adjustment
(calibration)
Setting of the zero point (calibration)
Counter 1 Counter for suction cycles (suction signal input)
Counter 2 Counter for valve switching frequency
Software version Displays the current software version
Serial number Displays the serial number of the ejector
Vacuum unit
Vacuum unit in which the measurement and setting values
are displayed
Vacuum (in mbar) The displayed vacuum is shown in mbar.
Vacuum (in kPa) The displayed vacuum is shown in kPa.
Vacuum (in inHg) The displayed vacuum is shown in inchHg.
Configuration of
signal output
Menu for configuration of the signal output
Normally open contact Setting of the signal output as a normally open contact
Normally closed
contact
Setting of the signal output as a normally closed contact
Air-saving function
(control)
Setting of the air-saving function
Air-saving function on Activation of the air-saving function
Air-saving function off Deactivation of the air-saving function
Blow-off time
Menu for configuration of the blow-off function