Schmalz SMPi 20, Руководство по эксплуатации, Страница: 35 / 50

S
CHMALZ
SCP
I
/ SMP
I
5-35
5 M
AINTENANCE
G
ENERAL MAINTENANCE
Remove dirt from the outside of the ejector by cleaning with a soft cloth and soap suds
(max. 60 °C). Ensure that the silencer and the controller are not soaked with soap suds.
S
ILENCER MAINTENANCE
The silencer can become very dirty from the increased effects of dust, oil or chips. This can
reduce the suction power. The silencer should be replaced in this case. Cleaning is not rec-
ommended due to the capillary effect of the porous material.
The ejector must only be operated with a silencer in order to avoid impermissible noise lev-
els.
Replacing the silencer
Step Description
1
Loosen the fastening screw on the silencer [7] and cover [13]
– Keep the screw and O-
ring [12] in a safe place.
2 Remove the silencer [7] and cover [13].
3 Attach the new silencer (item no. 10.02.02.03381) and cover [13].
4
Reattach the fastening screw and O-ring [12] and tighten.
Maximum torque = 1 Nm.
Only Standard SCPi