PRODUCT DESCRIPTION
www.schmalz.com
EN | 15
2.3.2 Setting the blow-off volume flow
The blow-off flow rate can be set for each ejector.
There is a valve screw below the vacuum connection. This valve screw can be used to set the blow-off
flow rate.
Turning it in a clockwise direction reduces the flow rate. Turning it in an anticlockwise direction
increases the flow rate.
The valve screw is equipped with a stop on both sides.
Do not overwind the stop on the valve screw. A minimum flow rate of approx. 10% is always
necessary for technical reasons.
The blow-off flow rate can be set between 10% and 100%.
+
-
