Schmalz SCPMi, Руководство по эксплуатации

Страница: 64 / 68

IO Link Data Dictionary SCPMi
21.10.01.00125 14.06.2019
J. Schmalz GmbH
Johannes Schmalz Str. 1, D 72293 Glatten
Tel.: +49(0)7443/2403 0
Fax: +49(0)7443/2403 259
info@schmalz.de
0 Boolean ro Vacuum is over SP2 & not yet under rP2
1 Boolean ro Vacuum is over SP1 & not yet under rP1
2 Boolean ro not used
3 Boolean ro Acknowledge that the Autoset function has been completed
4 Boolean ro
Acknowledge that EPC values 1 and 2 have been switched according to EPC
Select:
0 EPC Select = 00
1 otherwise
5 Boolean ro The part has been detached after a suction cycle
7?0 ro
EPC value 1 (byte)
Holds 8bit value as selected by EPC Select 0/1
00 Input pressure (0.1 bar)
01 CM Warnings (ISDU 146, bits 0 7)
10 Leakage of last suction cycle (mbar/sec)
11 Primary supply voltage (Volt)
7?0
7?0
0 Boolean wo Vacuum on/off
1 Boolean wo Activate Blow off
2 Boolean wo
Vacuum on/off with continuous suction disabled
(regardless of dCS parameter)
3 Boolean wo
Perform CM Autoset function (teach permissible leakage and
permissible evacuation time)
4 Boolean wo
5 Boolean wo
6 Boolean wo
7 Boolean wo
7?0 wo Pressure value from external sensor (unit: 0.1 bar)
Subindex
dec hex dec
16 0x0010 0 1...32 bytes ro J. Schmalz GmbH Manufacturer designation
17 0x0011 0 1...32 bytes ro www.schmalz.com Internet address
18 0x0012 0 1...32 bytes ro SCPMi General product name
19 0x0013 0 1...32 bytes ro SCPMi Product variant name
20 0x0014 0 1...32 bytes ro SCPMi 05 S01 NC M8 6 Order code
21 0x0015 0 Snr 9 bytes ro 000000001 Serial number
22 0x0016 0 2 bytes ro 03 Hardware revison
23 0x0017 0 SoC 4 bytes ro 0.0D Firmware revision
240 0x00F0 0 20 bytes ro Unique device identification number
241 0x00F1 0 11 bytes ro Type code of device features (see IODD)
250 0x00FA 0 Art 14 bytes ro 10.02.02.* Order number
251 0x00FB 0 2 bytes ro 00 Article revision
252 0x00FC 0 3 bytes ro C19
Date code of production (month+year, month is letter coded,
e.g. F18 = July 2018)
254 0x00FE 0 1...64 bytes ro SCPMi 05 S01 NC M8 6 Detailed type description of the device
24 0x0018 0 1...32 bytes rw *** User string to store location or tooling information
242 0x00F2 0 1?64 bytes rw *** User string to store identification name from schematic
246 0x00F6 0 1?64 bytes rw *** User string to store geolocation from handheld device
247 0x00F7 0 1?64 bytes rw *** User string to store web link to IODD file
248 0x00F8 0 1?64 bytes
http://?
https://?
rw https://myproduct.schmalz.com/#/ Web link to NFC app (base URL for NFC tag)
249 0x00F9 0 1?32 bytes rw *** User string to store storage location
253 0x00FD 0 1?16 bytes rw *** User string to store date of installation
2 0x0002 0 1 byte
5, 130, 165, 167,
168, 169
wo
0x05 (dec 5): Force upload of parameter data into the master
0x82 (dec 130): Restore device parameters to factory defaults
0xA5 (dec 165): Calibrate vacuum sensor
0xA7 (dec 167): Reset erasable counters ct1, ct2, ct3
0xA8 (dec 168): Reset voltages HI/LO
0xA9 (dec 169): Reset vacuum/pressure HI/LO
12 0x000C 0 2 bytes 0, 4 rw 0
Bit 0 1: reserved
Bit 2: Local parameterization lock (lock menu editing)
BIt 3 15: reserved
90 0x005A 0 nFc 1 byte rw 0
Bit 0: NFC write lock
Bit 1: NFC disable
Bit 2: Not used
Bit 3: local user interface locked (manual mode locked)
Bit 4: IO Link event lock (suppress sending IO Link events)
Bit 5 7: Not used
77 0x004D 0 Pin 2 bytes 0 999 rw 0
0 = Menu editing unlocked
>0 = Menu editing locked with pin code
91 0x005B 0 2 bytes 0 999 rw 0 PIN for writing data from NFC app
Access Control
Device Access Locks
PD In Byte 2
PD In Byte 3 EPC value 2, low byte
Process Data Out
Commands
Special Values
PD Out Byte 1
Availability
Select the function of EPC values 1 and 2 (2 bit binary coded)
(see PD In Byte 1?3)
CM Autoset
Parameter
PD Out Byte 0
Device Features
NFC Web Link
Input Pressure
ro
Minimum Cycle Time
IO Link Revision
Bit Name
ro
Process Data Input Data Type
EPC value 2, high byte
Vacuum
Detailed Product Text
Geolocation
16 bit integer
Access
Article Number
Vendor Text
Vendor Name
Menu PIN code
IODD Web Link
Select Production Profile (2 bit binary coded)
(see ISDU parameter areas P0 to P3)
Device ID
Signal SP2 (part present)
NFC PIN code
Remark
8 bit integer
EPC value 2 (word)
Holds 16bit value as selected by EPC Select 0/1
00 System vacuum (mbar)
01 Evacuation time t1 (msec)
10 Last measured free flow vacuum (mbar)
11 Air consumption of last suction cycle (0.1 NL)
Value Range
System Command
Storage Location
Yes
1.1 (compatible with 1.0)
EPC value 1
Remark
Article Revision
Device Settings
Extended Device Access Locks
Device Localization
Profile Set 1
ISDU Parameters
Firmware Revision
Display
Appearance
CM Autoset acknowledged
Identification
Parameter
EPC Select acknowledged
Signal SP3 (part detached)
EPC Select 0
Profile Set 0
EPC Select 1
00 [ green] Device is working optimally
01 [yellow] Device is working but there are warnings
10 [orange] Device is working but there are severe warnings
11 [red] Device is not working properly
Access
Vendor ID 234 (0x00EA)
Blow off
Setting Mode
8 bit integer
Equipment Identification
Hardware Revision
Product Text
Unique ID
Serial Number
2 bytes
Special Values
ISDU Index
Product Name
IO Link Implementation
Process Data
Remark Name
100245 (0x018795)
IO Link Bitrate 38.4 kBit/sec (COM2)
PD In Byte 0
Device status 7 ? 6
reserved
Access
3.4 ms
Installation Date
Application Specific Tag
2 bit integer
Default Value / Example
Process Data Output
Size
Process Data Input
PD In Byte 1
Signal SP1 (air saving function)
SIO Mode
Product ID
Production Date
Device Management
4 bytes
Bits
J. Schmalz GmbH 1 of 3 SCPMi Data Dictionary