Schmalz SCH-L, Инструкция по эксплуатации и техническому обслуживанию

Страница: 23 / 46

INSTALLATION
30.30.01.01117/06 www.schmalz.com EN | 23
Fig. 13
1. Insert chain (see chapter 5.2).
2. Attach the end stop (1) to the chain.
3. Pull the chain completely through (if necessary, turn the control wheel (5) up beforehand).
4. Press and hold down the rocker (4) in order to deactivate the gear limit switch and
simultaneously move the hook to the lowest position.
5. Turn the green control wheel (4) downward to the switch cam of the limit switch (8) (turn
counter clockwise for higher hook position, clockwise for lower hook position).
6. Turn the red control wheel (5) upward to the switch cam of the limit switch (6) (turn counter
clockwise for higher hook position, clockwise for lower hook position). See Fig. 13.
7. Release rocker (4) (must engage with control wheel).
8. Check the limit stop for proper functioning.
5
8
7
4
6