schmalenberger fluvo NT2 rondo, Руководство пользователя

Страница: 20 / 32

OPERATOR‘S MANUAL
2 0
NT2 rondo
Version: 27211 - F
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
7 Shutdown / Overwintering
7.1 Empty the pool
7.2 Face plate assembly overwintering
To prevent the transmitter battery from becoming discharged prematurely, remove the face
plate assembly and store at room temperature.
7.3 Emptying the pump
Warning! Risk of damage!
If there is a risk of freezing, then the facility must be made winterproof. For this
observe the following recommendations:
fig. 30
Warning! Risk of damage!
Make sure you have protected the whole
swimming complex adequately against
frost. Observe the instructions issued by
the manufacturer of the pool!
• Empty all the water out of the pool,
• or let the water out at least until it is
15-20 cm below the level of the
face pate as sembly.
• Switch off the master switch!
fig. 31
07 O-Ring
11 Plug screw
Screw out the plug screw (11) and drain
the water.
Warning! Risk of damage!
Make sure that all the water runs off! Also
empty the pipework connected to the
pump, if any!
Then screw the plug screw (11) back in
again with a new O-ring (07).
When restarting please observe the in-
structions in section 6.
8325
8326