Schletter FixGrid18-100, Инструкция по монтажу

Страница: 6 / 10

ALIGNMENT OF THE
BASE RAILS
EXTENSION OF THE
BASE RAILS
4
5
The permissible surface pressure of the roof has to be checked!
Sufficient drainage of rainwater has to be ensured!
Variant B
• Apply 20-mm-thick and 300-mm-long strips at a distance of 100 mm
• Load introduction on large area (for high loads and/or soft subsoil with low
permissible surface pressure)
• Also suitable for transversely draining roof water
The permissible surface pressure of the roof has to be checked!
Sufficient drainage of rainwater has to be ensured!
• Align base rails parallel to each other; align the FixZ system rails 18 flush and
at right angles to the base rails on the subsoil.
• Distance g = Module 23 mm
• Extend base rail as required.
To do so, insert the inner connector into two rails and fix each end with two self-
drilling screws.
Tool: Screwdriver with plug-in attachment 8 mm
g
F ix Grid 18-100 | V 2 | MO UNTING INSTRUCTIONS | 20 18 11
S C H L E T T E R S O L A R G M B H | S U B J E C T T O M O D I F I C A T I O N S
6