SCHLAGEL, INC.
SCHLAGEL, INC.
EDI - V5 CONTROL
Page 7
IMPORTANT
It is imperative that the spout centering adjustment just described be
physically verified at the distributor. The Autotune process cannot
guarantee that proper centering was accomplished.
If necessary, centering can be improved using the directions
contained later in this manual. (See Access Codes 5992 and 5997)
EVENT TOTALS
Access=1
Sen=0 Pos=0
Alm=0
(*) SCHLAGEL, INC.
<002> POSITION 2
-* ->_
FLATBACK/SWINGSET
V5.001 10 DUCTS
Dir=0 Slt=5 W/2=27
Upon completion of the Autotune process an information screen will appear with
the information it has acquired. Be sure to confirm that these details are correct.
Press ‘Enter’ after confirming this data.
Press ‘Enter’ to finish the setup and begin normal operation.
This is the OPERATING Screen. All operator control begins with this screen.
Customization of captions, spout access numbers, destination names and many
other options may now be made. Information on how to do this can be found in the
next section of this manual.
