5
WPR400 Wireless Portable Reader User Guide
Permanently or Temporarily Mount the WPR400
• Mount the WPR400 using screws or Velcro
®
strips.
• The WPR400 should always be mounted
at least one inch away from any metallic surface
.
• Place the WPR400 in a position where it was successfully link tested.
Permanent mount with screws:
1. Remove the WPR400 cover.
2. Using the base as a template, mark the mounting holes.
3. Drill a hole at each mark and use a wall anchor and screws (not provided) to attach the WPR400.
4. If mounted on a metallic surface, use one inch non-metallic spacers (not provided).
Temporary mount with Velcro
®
strips:
1. Attach
adhesive
Velcro
®
strips (“hook” side) to the WPR400’s base.
2. Attach the other adhesive Velcro
®
strips (“loop” side) to the mounting surface, positioned
according to the placement of strips on the WPR400’s base.
3. Press the WPR400 to the mounting surface with both sets of strips aligned.
