6
Fig. 5 Ribbon installation (II)
3.3 Loading Label Stock
1.
Insert a 1” label spindle into a paper roll ( *
I
f your paper core is 1 inch,
remove the 1.5” core adapter from the fixed tab. If label width is 4 inch wide,
two fixing tabs are not required. ).
Fig. 6 Label roll installation (I)
2. Open the printer’s top cover by releasing the green top cover open levers
Rear Hub
Ribbon
Lead Tape
Ribbon supply spindle
Ribbon Rewind Spindle with Paper Core
Paper Roll
1” Label Spindle
Printing Side
Face Up
1.5” Core
Adapter
*
Fixed Tab
