Schiller MAGLIFE LIGHT, Руководство пользователя

Страница: 42 / 51

MAGLIFE light
4.9 Alarms
4.9.1 Screen alarm symbols
S1
Audible alarms enabled
S2 Alarm sound disabled!
Displayed when at least one monitoring threshold is disabled.
Technical alarms will go off all the same.
S3 Alarm sound disabled for 2 minutes.
Displayed when you press key
(9) (for less than three
seconds). The remaining time is displayed under the symbol.
S4 Alarm sound disabled permanently.
Displayed when the alarm off key (
9 ) is held down for more
than three seconds.
Alarm muting function
Key (9) is used to mute the alarms.
•
When this key is pressed briefly, alarms stay disabled for two
minutes and the symbol
(S3) shows the time remaining in minutes up
the end of the disabling of the alarm.
•
If you press key (9) for three seconds or more, alarm sounds remain
disabled permanently or until the key (9) is pressed again. Symbol
(S4) is displayed, the symbol “
∞
” flashes and a beep is emitted once
in every two minutes to remind the user.
Caution: Audible alarm enabling/disabling
The permanent disabling of audible alarms is not permitted in some
medical facilities. That is why that function can be configured. (See
Permanent muting section 4.7.2.2 )
4.9.2 Physiological alarms
If the measured value of a parameter exceeds a threshold for over three
seconds, an alarm goes off and:
•
the display of the measured value flashes in red
•
an intermittent audible alarm sounds (sequence of four digital sounds that
is repeated)
•
the window of the parameter over the threshold flashes on a red
background and the display colour are inversed
•
Depending on the choice made while configuring (see section 4.7.2.2) the
alarm stops:
- As soon as its cause stops (non latched)
-
After the causes disappears and key (9) is pressed (latched)
Part number: 0-48-0080 Page 42