manualshive.com logo in svg

Schiller MAGLIFE LIGHT, Руководство пользователя

Поделиться
Скачать
Schiller MAGLIFE LIGHT Скачать руководство пользователя страница 37

MAGLIFE light

 

 

4.7.2.3 Options 

submenu 

The 

Options

 menu is used to enable or disable one or both parameters of 

MAGLIFE light

 

 
 
 
 
 
 
 
 
 
 

4.7.2.4  Software update submenu 

The person performing the update must have the requisite skills to make 
the relevant functional and safety checks and 

is entirely responsible for 

such checking.

    

The software is updated by means of a USB key, standard 1.1 or above. 
Make sure that the software on the USB key in the root directory (only that 
software) is compatible with the device you want to update. 
 
 
 
 
 
 
 
 
 
 
 
Insert the USB key in the connector 

(15)

 provided, select the update button 

and loading will start automatically. Follow the instructions. At the end of 
the loading process, the device will go off automatically. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Note:

 

The procedure has been described in detail in the Service 
Manual of the device. For more information, please contact 
the technical service network of Schiller Medical. 

 

Part number: 0-48-0080 

Page 37 

 

Содержание MAGLIFE LIGHT




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды