FRED easyport TRAINER
User guide
Page 27
6 Scenario selection procedure
6.1 List of available scenarios
Scenario 0
SNR
Scenario 1
SNR / SR
Scenario 2
SNR / SR / SNR
Scenario 3
SR
Scenario 4
SR / SNR
Scenario 5
SR / SNR / SR
Scenario 6
Elect fault / SR
Scenario 7
SR/ Elect fault / SR
Scenario 8
SR / SR / SNR
Scenario 9
Infrared control function
Notes :
SNR
Shock not recommended
SR
Shock recommended
Elect fault
Electrode fault
The last step of each scenario is indefinitely repeated.
6.2 Selection of a scenario on the device
•
Keep the orange SHOCK button (3) pressed while putting the device On with the green On/Off
button (1) to access in the configuration menu.
•
The selection in a menu is made by the blue ANALYSE button (2); the passage to the next step
in made by the orange SHOCK button (3).
•
Line 1: functioning mode of the device
•
Line 2: choice between automatic and manual analysis
•
Line 3: selection of one of the scenarios (0 to 8) or selection of the remote control (scenario
9).
•
Line 4: saving of the selected configuration with the blue ANALYSE button (2): the device
goes Off.
Note:
pressing longer than 3 seconds on the green On/Off button (1) puts the device Off without
saving the settings.
The device can then be switched on normally and it will operate according to the selected scenario.
Содержание FRED easyport TRAINER
Страница 2: ......