manualshive.com logo in svg

Schiller CARDIOVIT AT-2, Руководство по обслуживанию

Поделиться
Скачать
Schiller CARDIOVIT AT-2 Скачать руководство пользователя страница 62

Page 5.2

SCHILLER AT-2 6-Channel ECG Unit

SERVICE HANDBOOK  Issue  2.1  November 1998

Chapter 5

Adjustments

Introduction

This chapter provides the procedures necessary to check and adjust all service settings. Every

procedure is self-contained and details the tools required to carry out adjustments, and the test

equipment necessary. Any adjustments, jumper settings, special checks or functional tests that

are required on the module, or on associated modules or software, are also detailed.

In-text diagrams support the text where required and provide location details of connectors, test

points and adjustment potentiometers.

Specific warnings and cautions are given in the text where applicable.

The part numbers for all replaceable modules are given in Chapter 6.

The AT-2 has the following adjustments:

• Battery Charge Voltage (VR1 on the main board MK 12-1)

• ECG Amplifier reference voltage and ramp slope (VR2 and VR3 on the main board MK12-

1)

We recommend that the reference voltages are checked every year.

It is also possible to check the paper mark detector. However, no adjustments can be done.

Содержание CARDIOVIT AT-2














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды