manualshive.com logo in svg

Schiller CARDIOVIT AT-2, Руководство по обслуживанию

Поделиться
Скачать
Schiller CARDIOVIT AT-2 Скачать руководство пользователя страница 51

Page 4.5

Chapter 4

Module Removal and Replacement

SCHILLER AT-2 6-Channel ECG Unit

SERVICE HANDBOOK  Issue  2.1  November 1998

Physical Overview

The AT-2 unit is enclosed in a two part, medical standard, moulded plastic case.

The top part contains the keyboard with the base section containing all the electronics of the unit,

the thermal printer, the paper tray, the battery and mains transformer.

The electronics of the unit are contained on one single printed circuit board, the main board (MK

12-1 ) secured on spacers moulded in the base section.

The battery is secured in position in a moulded recess and the mains transformer is secured on

spacers above the printed circuit board.

The thermal printer is mounted on a paper tray/thermal printer assembly which is secured in the

base section complete.

Test Equipment, Tools, and Accessories

The following list details the tools, test equipment and accessories required to carry out all

functional tests, calibration procedures and adjustments that can be carried out on the AT-2plus.

The test equipment given here is general. If specific recommendation for test equipment is required,

please contact the SCHILLER service department.

• Digital Voltmeter

• Selection of cross-bladed, posi-drive and flat-bladed screwdrivers

• Cleaning agent such as Trichlorethylene

• Selection of spanners

• Double-sided tape

• ECG Patient Simulator

Содержание CARDIOVIT AT-2














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды