manualshive.com logo in svg

Schiller CARDIOVIT AT-2, Руководство по обслуживанию

Поделиться
Скачать
Schiller CARDIOVIT AT-2 Скачать руководство пользователя страница 34

Page 1.24

SCHILLER AT-2 6-Channel ECG Unit

SERVICE HANDBOOK  Issue  2.1  November 1998

Chapter 1

Operating Elements

Thermal Paper Handling

The thermal paper used in the AT-2 requires slightly different handling to normal paper as it can

react with chemicals and to heat. However, when the following points are remembered, the paper

will give reliable results:

The following points apply to both storage, and when archiving the results.

1. Before use, keep the paper in its original cardboard cover. Do not remove the cardboard

cover until the paper is to be used.

2. Store in a cool, dark and dry area.

3. Do not store near chemicals e.g. sterilisation liquids.

4. In particular do not store in a plastic cover.

5. Certain glues can react with the paper - do not attach the printout onto a mounting sheet

with glue.

Содержание CARDIOVIT AT-2














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды