Schiller Grounds Care BOB-CAT 33007J Скачать руководство пользователя страница 4

Страница: 4 / 58

Classic

Pro

MODEL NUMBER:

This number appears on

sales literature, technical manuals and price lists.

SERIAL NUMBER:

This number appears only

on your mower. It contains the model number

followed consecutively by the serial number.

Use this number when ordering parts or seeking

warranty information.

Located ontyhe right hand side of the engine

deck face up.

SAFETY

NOTICE !!!

Unauthorized modifications may present

extreme

safety hazards to operators and bystanders and

could also result in product damage.

Schiller Grounds Care, Inc. strongly warns against,

rejects and disclaims any modifications, add-on

accessories or product alterations that are not

designed, developed, tested and approved by Schiller

Grounds Care, Inc.'s Engineering Department. Any

Schiller Grounds Care, Inc.product that is altered,

modified or changed in any manner not specifically

authorized after original manufacture–including the

addition of “after-market” accessories or component

parts not specifically approved by Schiller Grounds

Care, Inc.–will result in the Schiller Grounds Care,

Inc.Warranty being voided.

Any and all liability for personal injury and/or

property damage caused by any unauthorized

modifications, add-on accessories or products not

approved by Schiller Grounds Care, Inc.will be

considered the responsibility of the individual(s) or

company designing and/or making such changes.

Schiller Grounds Care, Inc.will vigorously pursue

full indemnification and costs from any party

responsible for such unauthorized post-manufacture

modifications and/or accessories should personal

injury and/or property damage result.

This symbol means:

ATTENTION!

BECOME ALERT!

Your safety and the safety of others is involved.

Signal word definitions

The signal words below are used to identify levels

of hazard seriousness. These words appear in this

manual and on the safety labels attached to Schiller

Grounds Care, Inc.machines. For your safety and

the safety of others, read and follow the information

given with these signal words and/or the symbol

shown above.

DANGER

indicates an imminently hazardous

situation which, if not avoided,

WILL

result in death

or serious injury.

WARNING

indicates a potentially hazardous

situation which, if not avoided,

COULD

result in

death or serious injury.

CAUTION

indicates a potentially hazardous situation

which, if not avoided,

MAY

result in minor or moderate

injury. It may also be used to alert against unsafe

practices or property damage.

CAUTION

used without the safety alert symbol

indicates a potentially hazardous situation which, if

not avoided,

MAY

result in property damage.

Содержание BOB-CAT 33007J



























































Результаты поиска

Содержание BOB-CAT 33007J

Отзывы:

Похожие инструкции для BOB-CAT 33007J

Бренды по названию

Популярные бренды

Schiller Grounds Care BOB-CAT 33007J, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание BOB-CAT 33007J

Отзывы:

Похожие инструкции для BOB-CAT 33007J

Бренды по названию

Популярные бренды