Abb. 1
Abb. 2
The multisonic® infraControl
indicates that inhalation is com-
plete through the flashing of
the red LED “End/Off“ and
then turns itself off automat-
ically after a few seconds if
this is not triggered by pressing
the ON/OFF button.
The unit can be re-filled with
medicine after it has been
cleaned and the inhalation pro-
cess repeated. The unit has an
additional safety function that
is triggered if the unit reaches
a preset temperature. This en-
sures that the unit functions
reliably within a temperature
range that is optimal for it and
the medicine.
Continue to inhale until no
more aerosol is generated and
the quantity prescribed by
your physician has been used
up. If the 2 red function dis-
plays flash “End/ Off“ then
inhalation is complete and
the unit will turn itself off. Aft-
er inhalation remove the nebu-
liser head, the baffle plate and
sealing ring from the hand unit
and the mouthpiece and the
valves from the nebuliser head.
Shake out the remaining quan-
tity of medicine that cannot be
nebulized and clean the hand
unit and accessories as descri-
bed in the cleaning and disin-
fection section.
Caution:
Children and persons who need
care should only use the inha-
lation unit under the super-
vision of other adults or care
personnel.
14
infracontrol seiten engl. 03.04.2003 15:23 Uhr Seite 14
