Installation and commissioning DATAEAGLE 3XXX Classic
Chapter 5
– Extension and exchange
5.4.3. Profibus-Slave-Address when Radio Master is
exchanged
Proceed with the following steps when the Radio Master has
been exchanged:
Double-
click on the „Interface“, then once on „DP
Pa
rameter“.
The factory setting is shown:
Before de-installation of the Radio Master you have checked
if Profibus-Slave-Addresses have been assigned or if they
are detected automatically.
If they are detected automatically no further steps are
required here. Continue with the configuration of the Radio
Master.
If Profibus-Slave-Addresses have been assigned in the old
Radio Master you must now enter these addresses in the
new Radio Master.
No
address
assigned
