Installation and commissioning DATAEAGLE 3XXX Classic
Enter addresses
Chapter 5
– Extension and exchange
Double-click on the device name and then double-click
on „Radio“.
The radio module addresses as pre-set in the factory are
shown:
Enter the correct addresses.
In this example the radio system consists of one Radio
Master with address 01 and three Radio Slaves with the
addresses 02, 03 and 04.
Therefore station address 01 and partner addresses 02, 03
and 04 must be entered.
The station address can be entered directly.
Place the cursor into the address field and enter the
address.
Partner addresses can only be entered by using the „Add
function“.
