25
Support Components
STRUCTURAL WALL BAND
The structural wall band is supplied in two parts, a stainless
steel split band which fits tightly around the outside of the
chimney and a stainless steel back bracket. The parts are joined
together by means of the nuts and bolts provided. The use of
the item maintains a fixed distance of 50mm from the outer
casing of the chimney to the wall or fixing point. It can be
used in combination with the structural wall band extension
components to provide for adjustment to various distances
from the wall.
1.
Once the position of the support has been determined,
secure the back bracket to the wall with a method of fixing
to ensure adequate attachment and support.
2.
The stainless steel split band is then positioned around
the chimney section and secured with the nuts and bolts
provided to the back bracket.
3.
The wall bracket provides lateral stability only, it is NOT
load bearing and is to be positioned at maximum 4 metre
centres.
STRUCTURAL WALL BAND EXTENSIONS
Available in 3 different sizes. Type W1 gives adjustment of
between 55-100mm from the wall. L1 gives adjustment of
between 100-250mm from the wall and L2 gives adjustment of
between 100-440mm from the wall.
1.
Once the position of the support has been determined,
secure the back bracket to the wall with a method of fixing
to ensure adequate attachment and support.
2.
Fasten the structural wall band to the extension brackets
using the nuts and bolts provided.
Int Ø
80
100
130
150
180
200
230
250
300
Ext Ø
130
150
180
200
230
250
280
300
350
A
100
120
150
170
200
220
250
270
320
B
55
55
55
55
55
55
85
85
85
Int Ø
80
100
130
150
180
200
230
250
300
Ext Ø
130
150
180
200
230
250
280
300
350
C
174
194
224
244
274
294
324
344
394
D
180
200
230
250
280
300
330
350
400
E
110
110
110
110
110
110
110
110
110
Structural Wall Band
Structural Wall Band
with Type W1
Extension Assembly
Structural Wall Band
with Types L1 & L2
Extension Assembly
B
A
C
E
E
D
