19
Double Wall Adjustable Starter Section
Re-installation of stove after servicing
Position stove spigot immediately
beneath liner spigot of chimney.
Position narrower strip of
insulation around the locking band
with joint
to the rear.
Slide liner spigot down inside the
appliance spigot and seal using the
fire cement, rope gasket or similar.
Slide adjustable cover down 5mm
past insulation. Position final
insulation around spigot with joint
to the rear.
Slide locking band into place
around the joint on the liner. Now
tighten the bolt on the locking
band around the joint of the liner.
Slide adjustable case down
over the insulation to cover the
appliance spigot.
1
4
2
5
3
6
