Schick CDR Wireless, Руководство по установке

Страница: 32 / 36

28 B1051302 Rev. B CDR Wireless Installation
6.2.2.4. Surface Mounting (with Velcro Strips)
1. Select an area that will most likely face the front of the patient and be
within 6 feet (1.8 meters) of the area where the Wireless Sensor will be
used.
2. Attach the Antenna / Receiver Mounting Adapter ( Table 4 ).
3. Use the flat area on the Mounting Adapter as a guide and secure the
Antenna / Receiver to any flat surface using the Velcro strips provided
(
Figure 12 ).
6.2.2.5. Suspended Ceiling Mounting (with Clips)
1. Select an area that will most likely face the front of the patient and be
within 6 feet (1.8 meters) of the area where the Wireless Sensor will be
used.
2. Use the recessed area along the inside of the Adapter as a guide to place
the Adapter on the ceiling T-bar. Using commercially available ceiling
clips, secure the Adapter to the ceiling (
Figure 12 ).
3. Attach the Antenna / Receiver Mounting Adapter ( Table 4 ).
6. Using standard computer network Category 5 cable, connect the USB Interface to the
Antenna / Receiver.
7. Using the USB cable provided with your system, connect the cable from the USB
Interface to the PC workstation. If you need a different USB cable from the one
supplied with your system, refer to the CDR Wireless User Guide for compatible
cable lengths and markings.