Schick CDR Wireless, Руководство по установке

Страница: 29 / 36

CDR Wireless Installation B1051302 Rev. B 25
4. To position the USB Interface, perform the following:
6.2.2.1. Surface or Wall Mounting
1. Locate the USB Interface on either a stable, fixed surface or a wall. Use
the keyhole slots and the screws provided for wall-mounting ( Figure 10 ).
Keep in mind that you may need to periodically access the Sensor cradle
for channel configuration.
2. Using the USB cable provided with your system, connect the cable from
the USB Interface to the PC workstation. If you need a different USB
cable from the one supplied with your system, refer to the CDR Wireless
User Guide for compatible cable lengths and markings.
5. To position the Antenna / Receiver, perform one of the following:
6.2.2.2. Wall Mounting
1. Select an area that will most likely face the front of the patient and be
within 6 feet (1.8 meters) of the area where the Wireless Sensor will be
used.
2. Use the keyhole slots on the base of the Antenna / Receiver as guides and
mount the unit using commercially available screws appropriate for your
type of wall (
Figure 11 ).
6.2.2.3. Dental Lamp Pole Mounting (with Ty-Wraps)
1. Select an area that will most likely face the front of the patient and be
within 6 feet (1.8 meters) of the area where the Wireless Sensor will be
used.
2. Attach the Antenna / Receiver Mounting Adapter ( Table 4 ).
3. Use the slits on the Mounting Adapter as guides and secure the Antenna /
Receiver to the lamp pole using the ty-wraps provided ( Figure 12 ).