background image

INTRODUCTION

3

Thank you for choosing the 

UNICO X

 amplifier. UNICO X represents the state of the art in Swiss 

amplifier design, reflecting all the needs of the user. Offering a significantly improved power amp 

and  speaker  section,  together  with  a  crossover  filter  network,  limiter  and  gain,  this  impressive 

5-channel combo amp provides 280 W (123 dB SPL) of bi-amplified analog power. UNICO X is 

equipped with a 1” dome tweeter and 10” woofer.  It has been engineered with an optimized 2-way 

bass reflex system.

UNICO X is ideal for those seeking no-compromise acoustic instrument amplification in both live 

performance and studio situations. It delivers the wide low range typically needed for vocals or 

acoustic guitars, along with clarity and transparency. The five inputs can accommodate a variety of 

different setups, including an effect loop via the AUX OUT. 

SCHERTLER  amps  feature  a  sophisticated  Class-A  preamp  with  no  integrated  circuits  and  No 

Negative Feedback (NNFB), resulting in unparalleled dynamics and fast transient behavior.

To make the most of your UNICO X amplifier and to ensure trouble-free operation, please 

read 

this manual carefully

 before using the amp for the first time. We also advise keeping the manual 

for future reference.

Содержание UNICO X

















Отзывы: