Schertler UNICO X, Руководство пользователя

Страница: 15 / 16

15
FAQ
How do I make the connections to use a second
speaker or amplifier?
What is the best way to connect a delay or
other external effect to my UNICO X?
Will my condenser mic work with the UNICO
X’s 24 V phantom power?
The easiest way to connect an external speaker
(or a second active amp) is via the LINE OUT
or DI OUT.
If you only have one instrument connected
to your amp, you can use the master section
INSERT. For this connection you will need a Y
insert cable. Another way of connecting the
external effect is in series: the effect must be
in the chain just before the signal enters the
amp (guitar —> pedal —> amp). A third option
(maybe the best) is to use the amplifier’s AUX
OUT. This is the parallel send that sends the
signal to the internal reverb as well. By using
the AUX OUT you can feed your delay input
and continue using the internal reverb. The
channel effect send will be the same for both
the external effect and the internal reverb. You
will be able to set the amount of the effect/
reverb using the returns.
UNICO X provides way more than the nominal
24 VDC but, since it is not actually 48 VDC
we cannot legally label it P48. However,
most modern microphones will work just fine.
For more technical information, please read
the FAQ section on SCHERTLER website.