Schertler UNICO X, Руководство пользователя

Страница: 5 / 16

5
OPERATIONAL SAFETY
During live performances or installation, make sure that your amplifier’s mains cable cannot be
walked on, tripped over or “pinched” – particularly at sockets, around waste bins etc.
To avoid interference, do not use or install your amplifier near power transformers, TV sets, RF
transmitters, electric motors, or any other sources of electrical energy.
To avoid potential accidents, only use attachments, accessories and other equipment such as
carts, stands, tripods, brackets or cases that are specified or recommended by the manufacturer,
or sold with your amplifier.
Loud volume levels can cause irreparable damage to both the device and your hearing, so
avoid the following while using your amplifier:
- acoustic feedback (never point microphones directly at a loudspeaker)
- high levels of distortion
- impulse noises (loud “pops”) that can occur when a device is switched on/off, connected to
or disconnected from a system.
MAINTENANCE AND REPAIR
Your amplifier can be carefully cleaned, as necessary, using a dry cloth. Do not use water.
When cleaning, do not use any solvents (such as acetone or alcohol). These could damage the
amplifier’s finish and its labeling.
Visually check your amplifier on a regular basis for any signs of wear and tear or damage, but
do not attempt any kind of servicing or repair.
If your amplifier malfunctions, or is damaged, e.g. if liquid has been spilled or objects have
fallen inside, the amp has been exposed to rain or moisture, does not operate normally, or
has been dropped, please call your nearest SCHERTLER technical assistance center. (For more
information, you can contact us at the address on the last page of this manual.)