Scheppach 59112279942 страница 28 Скачать руководство пользователя

Страница: 28 / 52



www.scheppach.com

28 | GB

WARNING

Only use a safety petrol can. Do not smoke when
fuelling. Remove any oil or petrol residues. Switch off
the engine before refuelling and allow the engine to
cool down for a few minutes.

Start engine (Fig. 14)

• Ensure that the ignition cable is connected to the

spark plug.

• Stand behind the mower. One hand squeezes the

engine brake lever (3) to the handle, the other pulls
the pull start.

• Start the engine using the reversing starter (17). To

do this pull the handle approx. 10 – 15 cm (until you
feel a resistance) and then start the engine with a
sharp pull. If the engine does not start, pull the han-
dle again.

• Due to protective coating on the engine, a small

amount of smoke may be present during the initial
use of the product and should be considered normal.

Note: Easier starting in colder temperatures by

pressing the primer Fig. 14. Use only by a cold

engine!

CAUTION!

• Never allow the starter cord to snap back.
• Note: In cold weather, it may be necessary to re-

peat the starting process several times.

Turn off the engine:

• To turn off the engine, release the drive lever (2),

then the engine brake lever (3) and wait for the
blades to stop.

• Pull the spark plug boot from the spark plug (10)

boot in order to prevent the engine from restarting.

• Before you start the engine again, check the

cord for the engine brake. Check that the cord is

correctly fitted. If the cord is kinked or damaged, it

should be replaced.

Before mowing

Important information

• Make sure that you are properly dressed when

mowing. Wear sturdy, non-slip footwear; do not
wear sandals or tennis shoes.

• Inspect the blade. A blade that is bent or damaged

in any other way must be immediately exchanged
for a genuine replacement blade.

•

Do not fill the fuel tank indoors, but rather out in
the open. Use a filling funnel and a measuring jug.

Wipe off any spilled petrol.

• Read and follow in the instructions in the operating

manual as well as the information regarding the
engine and accessory equipment. Store the manual
in a place where it can be readily accessed by other
users of the machine.

• Exhaust gas is dangerous. Only start the engine

out in the open.

•

Make sure that all the guards are fitted and that

they are in good working order.

• Before you start mowing, you should run through

this operation several times in order to ensure that
the machine is working properly.

WARNING

Whenever you need to perform any kind of ad-

justment and/or repair work on your lawn mower,

wait until the blade has come to a complete stop.

Always switch off the engine before carrying out

any adjustments, maintenance or repairs.

Note!

Using the drive:

• Engine brake (3): Use the lever to stop the engine.

When you release the lever the engine and the
blade stop automatically.

• To mow, hold the drive lever (2) in the working posi-

tion. Before you start to mow, check the start/stop
lever several times to be sure that it is working prop-
erly. Ensure that the tension cable can be smoothly
operated (i.e. is not catching or kinking in any way).

• Drive lever (2):

If you press this the clutch for the drive will be
closed and the lawnmower will start to move with
the motor running. Release the drive lever in good
time to stop the moving lawnmower. Practice start-
ing and stopping before you use the mower for the

first time until you are familiar with controlling the

mower.

• The speed controller (21) is used to adjust the speed

(wheel drive) of the lawn mower.

Speed controller position:

Turtle

slow

Rabbit

fast

Important: The speed control may only be adjusted
when the engine is running.

Caution:

The blade begins to rotate as soon as the

engine is started.

Important:

Before you start the engine, move the

motor brake several times to be sure that the stop
cable is properly working.

Note:

The engine is factory set to a speed that is op-

timal for cutting and blowing grass into the basket and
is designed to provide many years of use.
• Check the oil level.
•

Open the fuel tank cap and fill the petrol tank (6)

up to the lower point of the tank inlet with about 0.8
litres of petrol. Use a funnel and a measuring con-

tainer for filling. Do not overfill the tank. Use fresh,

clean unleaded fuel.
Never mix oil with petrol. Buy fuel in amounts which
can be used within 30 days in order to guarantee
its freshness.
Note: Use only unleaded gasoline.