Scheppach 5904408901, Оригинальное руководство пользователя

Страница: 15 / 32


www.scheppach.com

service@scheppach.com

+(49)-08223-4002-99

+(49)-08223-4002-58
15 І 32
Device Description (Fig 1-3)
1. Wheels
2. Collector box
3. Locking device
4. Power supply
5. Transport handle
6. Reset switch
7. On / Off switch
8. Switch to change rotational direction of the cylinder
9. Adjustor screw
10. Chassis
11. Supports
A Side protection left
B Side protection right
C Washer 9 mm
D Button screw
E Hexagonal nut M8
F Washer 20 mm
G Spacer sleeve
H Hexagon screw M8
I Hubcap
Unpacking
•
Open the packaging and remove the device carefully.
•
Remove the packaging material as well as the pack-
aging and transport bracing (if available).
•
Check that the delivery is complete.
•
Check the device and accessory parts for transport
damage.
•
If possible, store the packaging until the warranty pe-
riod has expired.
m
ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal -
lowing and suffocation!
Intended use
The shredder is intended for compacting fibrous and
wood-related materials such as hedge and tree cut-
tings, branches, bark and pine cones.
Any use not expressly permitted in this manual may
damage the shredder and pose a serious danger to
the user.
Do not fell the shredder with stones, glass, metal,
bones, plastics or fabrics.
The operator or user is responsible for accidents and
injury or damage to third parties.
The manufacturer will not be held responsible for any
damage caused by improper operation or use beyond
the purpose intended.
Safety information
•
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowl-
Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
we hope your new tool brings you much enjoyment and
success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs due
to the non-compliance of the electric regulations and
VDE regulations 0100, DIN 57113 / VDE0113.
WE RECOMMEND:
Read through the complete text in the operating instruc-
tions before installing and commissioning the device.
The operating instructions are intended to help the user
to become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations. The operating instructions contain
important information on how to operate the machine
safely, professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and how to in-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country. Keep the operating instructions package with
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed concern-
ing the operation of the machine and who are informed
about the associated dangers. The minimum age re-
quirement must be complied with.
In addition to the safety notices contained in this op-
erating manual and the particular instructions for your
country, the generally recognised technical regulations
for the operation of identical devices must be complied
with.