Scheppach 4903401901, Перевод оригинального руководства пользователя

Страница: 15 / 96


www.scheppach.com /

service@scheppach.com /

+(49)-08223-4002-99 /

+(49)-08223-4002-58
GB | 15
• Always place the work piece on the grinding table.
To sharpen bent tools with the grinding disc, place
them securely on the table.
Warning! This electric tool generates an electro-
magnetic field during operation. This field can im -
pair active or passive medical implants under certain
conditions. In order to prevent the risk of serious
or deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool.
6. Proper Use
The machine meets the currently valid EU ma-
chine directive.
• The manufacturer’s safety, operation and main-
tenance instructions as well as the technical data
given in the calibrations and dimensions must be
adhered to.
• Relevant accident prevention regulations and other
generally recognized safety and technical rules
must also be adhered to.
• The machine may only be used, maintained or re-
paired by trained persons who are familiar with the
machine and have been informed about the dan-
gers. Unauthorized modifications of the machine
exclude a liability of the manufacturer for damages
resulting from the modifications.
• The machine is intended for use only with original
spare parts and original tools from the producer.
• Any other use is considered to be not intended.
The manufacturer excludes any liability for result-
ing damages, the risk is exclusively borne by the
user.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
7. Remaining hazards
The machine has been built using modern technol-
ogy and in accordance with recognized safety rules.
Some hazards, however, may still remain.
•
There is the danger of injuries to fingers and hands
by the rotating grinding tool when there is improper
guidance or application of the work piece to be
grinded.
• There is a danger of injuries by catapulted work
pieces when guided or fixed improperly.
• The use of incorrect or damaged mains cables can
lead to electrical injuries.
• Always stay attentive to what you are doing, even
when using the machine regularly. Bear in mind
that a fraction of a second is sufficient to cause
an injury.
• Keep your safety in mind. Safety is a combination
of common sense and staying alert as long as the
machine is switched on.
• When used in enclosed rooms, the machine must
be connected to a dust extractor unit to remove
wood chips and sawdust. The air flow rate at the
suction connector must be 20 m/s.
Additional safety rules for the oscillating spindle
grinding machines
m
WARNING: Do not use your machine until it is
completely assembled and installed according to the
instructions.
• If you are not familiar with the operation of the
sanding machine, ask the head of the department,
your teacher, or any other qualified person.
• ATTENTION: This machine has only been de-
signed for sanding wood or similar materials. The
sanding of other materials can cause fire, injuries,
or damage the product.
• Always wear safety goggles.
• This machine may only be operated indoors.
• IMPORTANT: Mount and use the machine on a
horizontal surface. A non-horizontal surface can
damage the motor.
• If the machine tends to tilt or walk (especially when
sanding long and heavy panels), it must be fas-
tened to a solid surface of sufficient carrying force.
• Firmly hold the workpiece when sanding.
• Do not wear gloves. Do not hold the workpiece
with a cloth during sanding.
• Never sand workpieces too small to be held safely.
• Avoid awkward hand positions where a sudden slip
could cause your hand to touch the sanding belt
or disc.
• When sanding a large piece of material, provide
an additional support at table height.
• Never sand an unsupported workpiece. Secure the
workpiece with the table or the fence. Exceptions
are the sanding of curved workpieces on the out-
side of the sanding disc.
• Always clear the table, fence or sanding belt of
scraps or other objects, before turning the machine
on.
• Do not perform any layout assembly or set-up work
on the table while the sanding machine is in op-
eration.
• Switch the machine off and pull the power plug
from the socket when fitting or removing acces -
sories.
• Never leave the working area of the sanding ma-
chine while the tool is running, or as long as it has
not come to an absolute standstill.