Scheppach 313795, Руководство по эксплуатации и технике безопасности

Страница: 47 / 80

39 GB/IE/NI
16. Electrical Connection
The installed electric motor is connected ready for operation.
The connection complies with the relevant VDE and DIN regu-
lations. The customer‘s network connection and any extension
cable used must comply with these regulations.
• The product meets the requirements of EN 61000-3-11 and
is subject to special connection conditions. This means that
its use at freely selectable connection points is not permitted.
• If the network conditions are unfavourable, the device may
result in temporary voltage luctuations.
• The product is intended for use only on premises which
have a mains continuous current rating of at least 100 A
per phase and are supplied by a distribution network with a
rated voltage of 230V.
• As the user, you must ensure – in consultation with your elec-
tricity supply company if necessary – that the continuous
current carrying capacity of the network at the connection
point to the public mains is suficient for the connection of
the product.
Important Instructions
If the motor is overloaded, it switches itself off automatically.
After cooling down (times vary), the motor can be switched
on again.
Faulty Electrical Connection Cable
Insulation damage often occurs to electrical connection cables.
The causes of this may be as follows:
• Pressure points if connection cables are routed through win-
dows or door gaps.
• Kinks caused by improper attachment or routing of the con-
nection cable.
• Cut surfaces caused by vehicles driving over the connection
cable.
• Insulation damage caused by tearing out of the wall socket.
• Cracks resulting from the insulation becoming old.
Such faulty electrical connections must not be used and may
endanger life due to the damage to the insulation.
Electrical connection cables should be checked regularly for
damage. Ensure that during such checks, the connection cable
is not connected to the mains.
Electrical connection cables must comply with the relevant VDE
and DIN regulations. Only use connection cables with the
marking H05VV-F.
It is stipulated by law that the type of connection cable must
be printed on it.
Alternating Current Motor
• The mains voltage must be 230 V~.
• Extension cables up to 25 m in length must have a cross-
section of 1.5 mm².
Connections and repairs to the electrical equipment may only
be performed by a qualiied electrician.
If you have any queries, please provide the follow-
ing information:
• Current type of the engine
• Data from the machine type plate
• Data from the motor type plate
17. Entsorgung und Wiederverwertung
The equipment is supplied in packaging to prevent it from being
damaged in transit.
The raw materials in this packaging can be reused or recycled.
The equipment and its accessories are made of various types
of material, such as metal and plastic.
Defective components must be disposed of as special waste.
Ask your dealer or your local council!
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must not be dis-
posed of together with domestic waste in compliance
with the Directive (2012/19/EU) pertaining to waste
electrical and electronic equipment (WEEE). This prod-
uct must be disposed of at a designated collection point. This
can occur, for example, by handing it in at an authorised col-
lecting point for the recycling of waste electrical and electronic
equipment. Improper handling of waste equipment may have
negative consequences for the environment and human health
due to potentially hazardous substances that are often con-
tained in electrical and electronic equipment. By properly dis-
posing of this product, you are also contributing to the effective
use of natural resources. You can obtain information on collec-
tion points for waste equipment from your municipal administra-
tion, public waste disposal authority, an authorised body for
the disposal of waste electrical and electronic equipment or
your waste disposal company.