Scheppach 313795, Руководство по эксплуатации и технике безопасности

Страница: 42 / 80

34 GB/IE/NI
• Use only saw blades whose maximum speed is not lower
than the maximum spindle speed of the tool being used and
which are suitable for the material to be cut.
• Do not create any rebates or grooves unless a suitable pro-
tective device, such as a tunnel guard, is attached above the
saw table.
• Circular saws must not be used for slotting (cutting grooves
which end in the workpiece).
• When transporting the power tool, use only the transport
devices supplied. Never use the guards for handling or trans-
porting the tool.
• During transport, make sure that the top part of the saw
blade is covered, for example with the guard.
• Ensure that the only spacer washers and spindle rings which
are used are suitable for the purpose stated by the manu-
facturer.
• The loor around the machine must be lat, clean and free of
loose particles such as chips and cutting residues.
• Working position always to the side of the saw blade.
• Do not remove any cutting residues or other parts of the
workpiece from the cutting area for as long as the machine
is running and the sawing unit is not yet in the rest position.
• Ensure that the machine is always attached to a workbench
or table whenever possible.
• Secure long workpieces against tilting at the end of the cut-
ting operation (e.g. unwinding stand or roller stand).
• m Caution! Never remove any loose splinters, chips or
jammed pieces of wood when the saw blade is still running.
- Always switch off the machine and remove the
plug before repairing any faults or removing jammed
pieces of wood.
- Always switch off the motor and remove the plug
before carrying out any conversions or adjustment,
measurement and cleaning work.
- Before switching on, check that the spanners and ad-
justment tools have been removed..
Warning! During operation, this power tool produces an
electromagnetic ield. Under certain circumstances, this ield
may negatively affect active or passive medical implants. In
order to reduce the danger of serious or fatal injuries, we rec-
ommend that individuals who wear medical implants should
consult their doctor and the manufacturer of the implant before
operating the power tool.
Safety instructions for handling saw blades
1. Only use tools which you know how to handle.
2. Pay attention to the maximum speed. The maximum
speed stated on the tool being used must not be exceed-
ed. Keep within the speed range if one is speciied
3. Note the direction of rotation of the motor and saw blade.
4. Do not use any insertion tools with cracks. Sort out
cracked insertion tools. Repairs are not permitted.
5. Clean grease, oil and water off of the clamping surfaces.
6. Do not use any loose reducing rings or bushes to reduce
holes on circular saw blades.
7. Make sure that fixed reducer rings for securing the inser-
tion tool have the same diameter and have at least 1/3
of the cutting diameter.
8. Make sure that fixed reducer rings are parallel to each
other.
9. Handle the tools used with care. It is best to store these
in their original packaging or special containers. Always
wear protective gloves to improve your grip and further
reduce the risk of injury.
10. Before using any of the tools, ensure that all protective
devices are correctly attached.
11. Before use, ensure that all of the tools used by you fulil
the technical requirements of this power tool and are
properly attached.
12. The saw blade supplied should only be used for sawing
wood and never for working metal.
7. Residual Risks
This power tool has been constructed in accord-
ance with the latest technology and the generally
recognised safety regulations. Nevertheless, it is
possible that individual residual risks may occur
during operation.
• Electrical hazard if improper electrical connection cables are
used.
• In addition, concealed residual risks may be present in spite
of all the precautions that have been taken.
• Residual risks can be minimised by observing the „Safety
instructions“ and „Use in accordance with the designated
purpose“, as well as the operating instructions.
• Do not put any unnecessary stresses on the machine: exces-
sive pressure during sawing will quickly damage the saw
blade. This may result in a reduction in the performance of
the machine, as well as a reduction in the cutting accuracy.
• Avoid switching the machine on by accident: when insert-
ing the plug into the socket, the power button must not be
pressed.
• Use the tool which is recommended in this manual. This will
ensure the optimal performance of your saw.
• Keep your hands away from the working area when the ma-
chine is in operation.
Before you carry out any adjustments or servicing work, turn
the device off and remove the mains plug.
8. Technical data
AC motor 230 V~ 50Hz
Power 2000 Watt
Operating mode S6 40% *
Idling speed 4800 min
-1
Carbide saw blade ø 254 x ø 30 x 2,8 mm
Number of teeth
24
Thickness riving knife 2,5 mm
min. Workpiece size WxLxH 10x50x1 mm
Table size
626 x 430 mm
Cutting height max. 90° 83 mm
Cutting height max. 45° 57 mm
Height adjustment 0 - 83 mm
Saw blade, swivelling 45 - 90°
Extraction connection ø 40 mm
Weight ca. 23 kg