Disassembly
2 - 16 Removing the Keyboard
2.Disassembly
Removing the Keyboard
Figure 12
Keyboard Removal
a. Remove screws from the
bottom of the computer.
b. Turn the computer over,
unsnap up the LED cov-
er module from point
towards the right .
c. Remove screws from
the keyboard.
d. Carefully lift the key-
board up and disconnect
the keyboard ribbon ca-
ble from the locking col-
lar socket.
e. Remove the keyboard.
5
1.
Turn
off
the computer, and remove the battery (
page 2 - 5
).
2.
Remove screws
-
from the bottom of the computer. Press at point
to unsnap the LED cover module (you
will need to use Pin Eject Tool to do this
Figure 12
a
).
3.
Turn the computer over, unsnap up the LED cover module
from point
on the left of the computer, towards the
right (
Figure 12
b
) as indicated by arrow.
4.
Remove screws
-
from the keyboard (
Figure 12c
).
5.
Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable
. Disconnect the keyboard
ribbon cable
from the locking collar socket
(
Figure 12d
)
6.
Carefully lift up the keyboard
(
Figure 12e
) off the computer.
1
2
3
4
5
6
10
11
11
12
13
Re-Inserting the
Keyboard
When re-inserting the
keyboard firstly align the
four
keyboard tabs (
Fig-
ure 12e
) at the bottom of
the keyboard with the
slots in the case.
a.
b.
Keyboard Tabs
d.
c.
e.
1
2
3
8
6
4
5
7
9
13
11
12
13
10
4. LED Cover Module
13. Keyboard
•
7 Screws
Содержание XMG A502
Страница 1: ......
