EN
9
BEFORE USING THE APPLIANCE
in either direction. This should be done before placing food
in the fridge freezer.
•
Before using your fridge freezer, wipe all parts with
a solution of warm water and a teaspoon of sodium
bicarbonate, then rinse with clean water and dry.
Place all parts in the fridge after cleaning.
•
Install the plastic distance guide (the part with black vanes
at the rear) by turning it 90° (as shown in the figure) to
prevent the condenser from touching the wall.
•
The fridge freezer should be placed against a wall with a
free space not exceeding 75 mm.
Before using your fridge freezer
• When using your fridge for the first time, or after
transportation, keep it in an upright position for at least 3
hours before plugging into the mains. This allows efficient
operation and prevents damage to the compressor.
•
Your fridge may have a smell when it is operated for the
first time. This is normal and the smell will fade away when
your fridge starts to cool.
Information on No-Frost technology
No-frost refrigerators differ from other static refrigerators in
their operating principle.
In normal fridges, the humidity entering the fridge due to
opening the door and the humidity inherent in the food causes
freezing in the freezer department. To defrost the frost and ice
in the freezer compartment, you are periodically required to
turn off the fridge, place the food that needs to be kept frozen
in a separately cooled container and remove the ice gathered
in the freezer department.
The situation is completely different in no-frost fridges. Dry
and cold air is blown into the fridge and freezer compartments
homogeneously and evenly from several points via a blower
fan. Cold air dispersed homogeneously and evenly between
the shelves cools all of your food equally and uniformly, thus
preventing humidity and freezing.
Therefore your no-frost fridge allows you ease of use, in
addition to its huge capacity and stylish appearance.
