background image

 

 

 

Einstellanleitung Elektronikmotor-Studio Star_englisch.docx 

Stand: 13.01.16 

Seite 16 von 16 

4.  Copyright / References to this documentation 

The copyright (copyright ©) for the present documentation is being kept by 

Schanz Rollladensysteme GmbH

 as well as partial-

ly by the suppliers of the sub vendor documentation.  
The containing information is solely designed for the operating companies of our roller shutters. It may not be changed, extend-
ed, duplicated, saved on data linked institutions and spread without our written agreement nor should it be used for other pur-
poses. The containing information in this document makes no claim to be complete. We have done everything to reflect the con-
tent concerning our products to be correctly and up to date. However a warranty for the correctness of the documentation can-
not be given. Especially photographs and other images can contain components which do not belong to the standard scope of 
delivery (options), or which have been changed in the meantime. Changes in connection with a further development as well as 
the „state of technology“ are subject to alteration. Copyright © Schanz Rollladensysteme GmbH, 2015 
 

Содержание Studio Star

















Отзывы: