User Manual, Power contactors, series CT1115/08 and CT1130/08
Rev. 2.2
Page 13/26
Storage
Storage
Schaltbau recommends storing the contactors in the original packing box.
The contactors should be stored in a dry and suitable place.
Return shipments
Schaltbau recommends using the original packing box for any return ship-
ments. If no original packing box is available care should be taken to pack
the contactor in a way that prevents damage during the shipment.
Installation
Unpacking and handling
Before opening the packaging, perform a visual inspection for any signs that
could indicate damage having occurred during transport (impacts, bumps,
falling etc.).
Unpack the contactor and put it on the table in an upright position. With one
hand press the release buttons on top of the arc chamber together and turn
the 4 levers down one by one to unlatch the Upper Module. Lift the Upper
Module and put it on the table in an upright position.
Remove both protection covers (the small one is fixed with a M4 x 10 screw,
the big one with knurled thumb screws).
The Lower Module is ready for mounting.
If the contactor has been subject to excessive shock influ-
ence (e.g. during transport) do not install the contactor.
Only single pole contactors may be carried holding the Upper
Module provided the contactors are safely locked and the de-
vices are undamaged.
