VLV55|VLV65 - Volumetric flow controller
TECHNICAL DOCUMENTATION
Specification text |
Construction subject to change
No return possible
Version: 2017-04-24 | Page 31
SPECIFICATION TEXT
VLV55 | VLV65
Volumetric flow controller in round design, for round ductwork
connection, for use in supply and return air systems for con-
stant or variable volumetric flow regulation.
Measurement of the volumetric flows according to the Venturi
principle. Standardised Venturi nozzle with measuring points
for differential pressure measurement in front of the nozzle
and in the nozzle neck. This ensures high control accuracy at
low air velocities, duct pressures and any inflow conditions.
Nozzle and differential pressure sensor are resistant to pollu-
tion. Connecting pipe is suitable for air ducts to DIN EN 1506.
Position of the control damper is visible from outside.
Leakage at the damper blade to DIN EN 1751, class C.
Housing leakage to DIN EN 1751, class 4.
Special features
designed for use at low air velocities and duct pressures
position-independent installation possible
high controlling precision with any inflow
resistant to pollution
Materials of housing and internal parts
Housing made of galvanised sheet steel (-SV)
Damper blade seal made of EPDM, silicone- and halogen-free
Ring chamber sealing made of EPDM, silicone- and halogen-
free
Venturi nozzle made of aluminium, with attached measuring
points for determining average values to DIN EN ISO 5167.
Technical data
Nominal sizes 100 - 315 mm
Volumetric flow range 13 - 2195 m³/h (4 - 610 l/s) approx. 10
- 100 % of nominal volumetric flow
Minimum pressure difference of 5 - 150 Pa
Allowed static differential pressure range: 20 - 750 Pa
Allowed ambient temperature 0 - 50 °C
For use with duct velocities of 0.5 - 8 m/s (depending on the
nozzle variant)
Add-on parts
Electronic compact controller suitable for individual control or
connection to a building control system. If required, in BUS-
capable design (LON, Modbus RTU, KNX, BACnet).
Supply voltage 24 V AC/DC, 50/60 Hz
wired and parameterised ex works
controller with potentiometer and display for subsequent ad-
justment on request
possible positive controls: CLOSED, V
min
, V
max
, OPEN
It is possible to subsequently adjust the manufacturer set op-
eration volumetric flow.
Product: SCHAKO
type VLV
Housing, damper blade and measuring sensor at an extra
charge with DD coating (-DD)
Accessories (at an extra charge)
METU flange (-MF1), on both sides, duct flange type AF.
Flat flange (-FF1), on both sides, to DIN 24154/5.
Rubber lip seal (-GD1), on both sides, made of special rubber.
Duct silencer (-RS), rigid design, casing and perforated sheet
made of galvanized sheet steel with mineral wool filling
